Naresh Radio LLP

The Rishabh 1000A AC/DC Clamp Meter is a high-performance True RMS instrument designed for accurate and safe measurement of current, voltage, resistance, continuity, and more. Built for electrical professionals, it provides precise readings even in complex electrical environments.

Key Features:

• Current Measurement: AC/DC current up to 1000A

• Voltage Measurement: AC/DC voltage up to 1000V

• True RMS: Ensures accurate measurement in non-linear loads

• Jaw Opening: Wide jaw for large conductors

• Display: Large backlit LCD for easy visibility in low-light conditions

• Safety Rating: CAT IV 600V / CAT III 1000V for maximum protection

• Additional Functions: Resistance, continuity, diode test

• Ergonomic Design: Compact, lightweight, and durable for field use

Applications:
Ideal for industrial, commercial, and residential electrical testing, power distribution systems, and maintenance work.

The Rishabh 400A AC/DC Clamp Meter is a high-precision True RMS instrument designed for accurate and safe measurement of current, voltage, resistance, and other essential electrical parameters. Compact, durable, and easy to use, it is an ideal tool for electricians, service engineers, and industrial professionals.

Key Features:

• Current Measurement: AC/DC current up to 400A

• Voltage Measurement: AC/DC voltage up to 600V

• True RMS: Accurate results for non-linear loads

• Jaw Opening: Wide jaw to measure medium-sized conductors

• Display: Large backlit LCD for easy visibility in all conditions

• Safety Rating: CAT III 600V / CAT II 1000V

• Additional Functions: Resistance, continuity, diode check, frequency measurement

• Ergonomic Design: Lightweight and robust for long-term use

Applications:
Ideal for maintenance, troubleshooting, and testing in residential, commercial, and industrial setups.

RISH Clamp 1000A measures, calculate and displays important electrical parameters of single phase or three phase power system. It also features Resistance, continuity, diode and non contact voltage                                                                                                                                                                                                                                                          detection.

• AC & DC Voltageup to 1000V
• AC & DC Current upto 1000A
• Inrush/Peak Value Measurement
• Active,Reactive and ApparentPower
• Horse Power Measurement
• kWh
• Measure up to 49th Harmonics
• Phase Angle
• THD
• DF
• Power Factor
• Crest Factor
• LPF Mode for VFD Application

• Type of Product Digital AC/DC Clamp Meter
  Sensing True RMS
  Display 3¾ Digits LCD Display
  Display Counts 3100
  Jaw Opening Size 51 mm
  DC Current Range 0-1000 A
  DC Current Accuracy ±(1.5 % + 5 Digits)
  DC Voltage Range 30 mV-1000 V
  DC Voltage Accuracy ±(0.3 % + 1 Digits)
  AC Current Range 0-1000 A
  AC Current Accuracy ±(1.5 % + 5 Digits)
  AC Current Resolution 0.1 A / 1 A
  AC Voltage Range 0-1000 V
  AC Voltage Accuracy ±(0.75 % + 1 Digits)
  Resistance Accuracy ±(0.25 % + 1 Digits)
  Capacitance Range 30 nF-30 µF
  Capacitance Accuracy ±(3.0 % + 3 Digits)
  Frequency 0-100 kHz
  Frequency Accuracy ±(0.5 % + 1 Digits)
  Temperature Range -200° to 800°C
  Temperature Accuracy ±(1.0 % + 1 Digits)
  Power One 9 V Battery
  Operating Environment 0° to 40°C
  Relative humidity <75 % RH
  Weight 600 g
  Max. DC Current Range 601-1000 A
  Max. DC Voltage Range 601-1000 V
  Max. AC Current Range 601-1000 A
  Max. AC Voltage Range Above 750 V

• Direct and alternating voltages from 100μV ... 1000V
• Direct and alternating currents from 10μA ... 10.00A
• Resistance from 1Ω... 60.00MΩ.
• Capacitance from 1pF ... 40.00 mF with zero correction
• Frequencies from 10.00Hz ... 10MHz
• Diode measurement and continuity testing
• Hold measurement .
• Relative measurement.
• Duty cycle (%) measurement
• Temperature measurement with K type Thermocouple
• Peak value measurement.
  The dual display included a main display and a sub display. Main display always display current measurement value where as sub display shows some special measurements like maximum/ minimum value, reference value for relative value measurement.Also dual display is used to display at the same time Voltage/ Current with Frequency, Frequency with Duty cycle etc. Peak HoldMinimum and maximum Peak values are hold in VAC, mAAC, AAC. 

• Direct and alternating voltages from 100μV ... 1000V
• Direct and alternating currents from 10μA ... 10.00A
• Resistance from 1Ω... 60.00MΩ.
• Capacitance from 1pF ... 40.00 mF with zero correction
• Frequencies from 10.00Hz ... 10MHz
• Diode measurement and continuity testing
• Hold measurement .
• Relative measurement.
• Duty cycle (%) measurement
• Temperature measurement with K type Thermocouple
• Peak value measurement.
  The dual display included a main display and a sub display. Main display always display current measurement value where as sub display shows some special measurements like maximum/ minimum value, reference value for relative value measurement.

Versatile - Horizontal and vertical manual dual slope function enable change in grade in two-axis applicationFlexible - Variable speed and scan angle selection allow optimum usability at different lighting conditionsRobust - IP56 rated to protect against dust and water for tough jobsite conditions, with shock warning function to alert error due to vibration

Our organization is well known in the market for providing a broad assortment of 1 Phase Multifunction Meter to our clients. These products are manufactured using quality tested components.

Owing to devoted experts, we have been competent to present a wide range of 1 Phase Multifunction Appliance Meter. These products are made as per industry norms and standards.

Being the foremost company, we are offering an exclusive array of Multifunction Automotive Meter. Our offered array is famous for its attractive functions.